Most of the functioning inconveniences are generally due to mere reasons or to defective electrical connections. These can be easily be solved:
The unit does not start:
•
Check if there is power at the wall socket;
•
Check that the unit is properly plugged.
The internal temperature is not cold enough
•
Check if the door is well closed or if there is something that doesn’t allow the door cabinet to close perfectly:
•
Check that the cabinet is not placed too close to any heating source;
•
Check that the cabinet leans against the wall and that the front grill is free from any obstructions;
•
Check the thermostat position;
•
Check that the condenser is not blocked by dirt; to clean it use a brush or a vacum- cleaner.
The unit is noisy
•
Check that all bolts and nuts are properly fasten
•
Check if any pipe or blade touches any other parts of the cabinet
•
Check that the cabinet is placed on a plane surface
If there is moisture inside the cabinet
:
•
It is normal in those periods with high humidity
•
Part of this humidity must be considered normal were the products are not wrapped or if they are inside containers without lid;
•
It can be cause by frequent opening or long opening of the door. Check if the door close properly.
IF THE INCONVENIENCES WILL NOT STOP PLEASE CONTACT THE NEAREST ASSISTANCE-SERVICE CENTRE
HOW TO REPLACE THE LIGHTS
ATTENTION THIS OPERATION MUST BE DONE ONLY BY AUTHORISED TECHNICAL SERVICE OR QUALIFIED
PERSONNEL
A)
INSIDE LAMP
1.
Remove the plug from the socket;
2.
Take off the lamp-lock from its seat with a screwdriver;
3.
Take off the light screen making it move on the right and then gently press it downward;
4.
Replace the light
5.
Invert the operation order to place the light
B)
CANOPY LAMP
•
Remove the plug from the socket;
•
Unscrew the fastening screws to take off the canopy
•
Replace the light
•
Invert the operation order to place the light
6 INCONVENIENCES AND REMEDIES
