21
1-
LCC Control, Self Clean, Convection, Electric
LCC Control, Self Clean, Convection, Electric (continued)
Models:
Models:
LCC190 Control, Self Clean, Convection, Electric
MER8770WB0
MER8770WQ0
MER8770WS0
MER8770WW0
YMERH770WB0
YMERH770WB1
YMERH770WS0
YMERH770WS1
YMERH770WW0
YMERH770WW1
Reviewed by Perkins, Amber F. | Released
LCC190 Control, Self-Clean, Convection, Electric
AER6011VAB0
AER6011VAS0
AER6011VAW0
Reviewed by Staples, Debra L. | Released
Previous Offset shown, or U-00 is displayed.
Adjusts temperature in 10
⁰ F (5⁰ C) increments
between -30⁰F and +30⁰F.
Display
"tESt" (You are in the test mode)
###⁰F or ⁰C (Oven Sensor Temperature)
-30⁰F to +30⁰F (Oven Offset Temperature)
### (Control Software Version)
### (Control Memory Checksum)
"CLr" (Good Control)
F# *(Error Code - See Tech Sheet for Repair) ##
(Hours of operation at error code)
#### (Total hours of oven operation)
"00" (Door Open) or "01" (Door Closed)
B, D, E, F, M, T, U, V, AD, AE, AF, AN, AO, AP, AU
Diagnostic Mode
Press CANCEL/CANCEL/START.
Action
"+" again
"+" again will display 1 of the 3
"+" again
"+" again
"+" again
When checking for fault codes and "GOOd" is displayed, do not replace the control.
*Press "START" to clear all fault codes.
Temperature Adjustment
Press TEMP/TIME or
TEMP/HOUR "+" or "-".
Press BAKE for 5 seconds.
Press START.
Press the TEMP/TIME or
TEMP/HOUR "+" key.
Press "+" again
Bake and Broil Temperatures are offset
automatically to the same degree.
If
START is not pressed within 1 minute, adjustment
is ignored.
Previous Offset shown, or U-00 is displayed.
Adjusts temperature in 10
⁰ F (5⁰ C) increments
between -30⁰F and +30⁰F.
Display
"tESt" (You are in the test mode)
###⁰F or ⁰C (Oven Sensor Temperature)
-30⁰F to +30⁰F (Oven Offset Temperature)
### (Control Software Version)
### (Control Memory Checksum)
"CLr" (Good Control)
F# *(Error Code - See Tech Sheet for Repair) ##
(Hours of operation at error code)
#### (Total hours of oven operation)
"00" (Door Open) or "01" (Door Closed)
B, D, E, F, M, T, U, V, AD, AE, AF, AN, AO, AP, AU
Diagnostic Mode
Press CANCEL/CANCEL/START.
Action
"+" again
"+" again will display 1 of the 3
"+" again
"+" again
"+" again
When checking for fault codes and "GOOd" is displayed, do not replace the control.
*Press "START" to clear all fault codes.
Temperature Adjustment
Press TEMP/TIME or
TEMP/HOUR "+" or "-".
Press BAKE for 5 seconds.
Press START.
Press the TEMP/TIME or
TEMP/HOUR "+" key.
Press "+" again
Bake and Broil Temperatures are offset
automatically to the same degree.
If
START is not pressed within 1 minute, adjustment
is ignored.
Press TEMP/TIME “+” key.
Press TEMP/TIME “+” or “-”.
##
(Hours of operation at error code)
“GOOd”
*Press “START TIME” or “DELAY START” to clear all fault codes
Содержание AER5522VAS0
