Whirlpool 8177945, Руководство пользователя

Страница: 15 / 40

3-3
REMOVING A SPARK IGNITOR & SPARK MODULE
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
1. Turn off the gas and electrical power going
to the range.
2. Raise the cooktop and prop it up (see
page 3-2).
3. To remove a spark ignitor:
a) Disconnect the ignitor wire from the
spark module.
CAUTION: When you work on the gas range,
be careful when handling the sheet metal parts.
Sharp edges may be present, and you can cut
yourself if you are not careful.
WARNING
FIRE HAZARD
Shut off gas supply line valve before servic-
ing the range.
Check all gas line connections and replace
all panels before operating the range.
Failure to do so could result in explosion, fire,
or other injury.
4. To remove the spark module:
a) Disconnect the four ignitor and two
power supply wires from the terminals.
b) Remove the two mounting screws.
b) Push the ignitor and clip out of the
cooktop mounting hole. NOTE: You may
have to squeeze the ignitor clip together
at the gap to remove the ignitor from
the mounting hole.
Spark
Module
Spark
Ignitor
Gap In
Clip
Spark
Module
Mounting Screw
(1 of 2)