Whirlpool 8177945, Руководство пользователя

Страница: 18 / 40

3-6
REMOVING THE OVEN BURNER & BURNER IGNITOR
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
1. Turn off the gas and electrical power going
to the range.
2. Open the oven door and remove the racks.
3. Remove the oven floor by lifting the back
and unhooking the flange from the two
clips, then slide the floor back to unhook
the front lip, and remove the floor.
CAUTION: When you work on the gas range,
be careful when handling the sheet metal parts.
Sharp edges may be present, and you can cut
yourself if you are not careful.
WARNING
FIRE HAZARD
Shut off gas supply line valve before servic-
ing the range.
Check all gas line connections and replace
all panels before operating the range.
Failure to do so could result in explosion, fire,
or other injury.
4. Remove the two screws from the front of
the flame spreader. Pull the spreader for-
ward, slide the tabs out of the slots in the
back of the oven liner, and remove the
spreader.
Oven Floor
Lift & Unhook
Clip
Clip
5. To remove the oven burner:
a) Remove the front screw.
Flame Spreader
Screw
Screw
Tabs In Slots
Burner Ignitor
Oven Burner
Screw