Whirlpool 8177945, Руководство пользователя

Страница: 28 / 40

3-16
REASSEMBLY NOTES:
1. When you install the inner door glass,
position the glass with the heat-treated
side facing the oven.
The heat-treated side is marked with an
“HS” near the edge of the glass. The heat-
treated side is also conductive and can be
checked with an ohmmeter by touching
the meter probes against the surface of
the glass. If the meter indicates continuity,
you are on the heat-treated side. If no
continuity is measured, you are on the
untreated side.
2. When you install the inner door glass,
position the edges of the glass on both
sides inside the corner holders and against
the tabs, as shown.
Heat-Treated Side Of
Glass Facing Oven
Inner Oven Door
Glass Assembly
3. Assemble the vertical rails and the top and
bottom glass supports with the heat-treated
inner glass outside the oven door, as
shown.
Install Corner Of
Glass Into Holder
Keep Edge Of
Glass Against
These Two Tabs
IMPORTANT: Make sure that none of the
insulation shows through the inner door glass
before you clip the assembly into place.
4. Carefully place the inner door glass as-
sembly inside the door and insert the
bottom tabs on the vertical rails into the
door slots, then clip the top tabs into their
slots.