Whelen Engineering Company 295SDA1 Скачать руководство пользователя страница 10

Page 10

• The other speaker will shut off for 2 seconds so that the new tone can 

be clearly identified.

• When the desired tone is generated, it is automatically saved as the 

override tone in that switch position for that speaker.

To change the tones in a HANDS FREE cycle position 
(STANDBY switch): 

• Activate the STANDBY switch. 
• Press and release the MANUAL switch to advance to the HAND FREE 

cycle position that you want to change.

• Press and release the lighting momentary switch 4 to change the tone 

produced by speaker 1.

OR…

 

• Press and release the lighting momentary switch 5 to change the tone 

produced by speaker 2.

• Each time a switch is pressed and released, the next available tone will 

be broadcast on the corresponding speaker.

AND…

• The other speaker will shut off for 2 seconds so that the new tone can 

be clearly identified.

• When the desired tone is generated, it is automatically saved for that 

HAND FREE cycle position for that speaker.

To change the tone for the MANUAL and AIRHORN switch: 

• Press and hold the MANUAL or AIRHORN switch. 
• Press and release the lighting momentary switch 4 to change the tone 

produced by speaker 1.

OR…

• Press and release the lighting momentary switch 5 to change the tone 

produced by speaker 2.

• Each time a switch is pressed and released, the next available tone will 

be broadcast on the corresponding speaker.

AND…

• The other speaker will shut off for 2 seconds 

so that the new tone can be clearly 
identified.

• When the desired tone is generated, it is 

automatically saved for the chosen switch 
for that speaker.

Adjusting Radio Levels

:

Wail coast

Phased Wail coast

Wail Stop

Phased Wail Stop

Mechanical coast

Phased Mechanical coast

Mechanical stop

Phased Mechanical stop

Tone list for the MANUAL button:

··

·

··

·

··

Tone List for Airhorn button:

Tone off

Airhorn

Airhorn low

··

·

RADIO
VOL

PA

VOL

To adjust RADIO or PA volume,
use a small flat blade
screwdriver.

SW1

ON

ON

OFF

SW2

ON

ON

ON

SW3

ON

ON

ON

SW4

ON

OFF

ON

Operation

Normal operations

Programming lighting

Programming Siren tones

Any other Dip Switch setting combinations are not valid
and are not recomended.

Di Switch Settin s

p

g :

Содержание 295SDA1











Отзывы: