L-8 / Dec 2016
A P P E N D I C E S
page A – 10
through the control surface front panel controls, and begin mixing. One thing you will
notice is that, as soon as a fader channel is turned on, the system automatically locks the
connection (as shown by the red line on the GUI screen) to prevent someone else from
breaking your connection while you are on air.
Remember, you must also make connections from the mixer signals to actual audio
destinations before the mixes are routed through the WheatNet‑IP system. Use the GUI
to make these connections and lock them if necessary.
Lastly, you can continue setting up control surface options, for logic, mutes, signal
visibility, and others.
