![background image](http://html1.mh-extra.com/html/whd/amp-4200/amp-4200_manual_968178011.webp)
Manual AMP 4200
Valid for
111-425-04-001-00
Version (modifications reseverd)
21.02.2022
Seite 11 of 17
10.2.3. Power Saving
If “Auto” is selected as “Power Saving”, the amplifier goes into stand-by mode after an extended period
(approx. 20 min.) without an input signal.
You can use the
trigger function
e.g. if you use a control signal via a beamer (home cinema).
Note:
As soon as an input signal is present again, the amplifier is reactivated.