47xxN Series Time Zone Display
Operating and Installation Instructions
4 - Time and Date Setting
The 47xxN series time zone displays can be configured to automatically adjust for daylight savings changes,
however if the unit is run in Standalone mode of operation (i.e. unsynchronised), you may occasionally
need to manually adjust the time.Please refer to the diagram below for further information.
Function ‘Time Setting Mode’. Press ‘Up‘ to enter ‘Time Setting Mode’ and set the seconds count.
Seconds Setting Mode. Press ‘+’ to increment seconds, ‘-’ to set to zero. Press ‘Up’ to set minutes count.
Minutes Setting Mode. Press ‘+’ or ‘-’ to increment or decrement minutes. Press ‘Up’ to set the hours
count. Complete time setting process detailed in table below.
Fu Ti
Time and Date settings
Function
Display Type
Description
'Up' button function
hh:mm
Second
36
Set second (minus button zeros seconds).
Select minutes
Minute
12
47
Set minute.
Select hours
Hour
12
47
Set hour.
Select year
Year
20 14
Set year.
Select month
Month
26
06
Set month.
Select day of month
Day of Month
26
06
Set day of month.
Select Leap Second
Leap Second
LS
No
Enable leap second - 59, No or 61. (Please leave at
0 unless a leap second is scheduled)
Exit to Time Display
6
Issue 2.1
