47xxN Series Time Zone Display
Operating and Installation Instructions
9 - Stopwatch Setup
The 47xxN series time zone display can be configured to operate as a multi function stopwatch controlled
via the supplied IR remote control.
The clock can be switched between clock and stopwatch modes by pressing the ‘Clock’ and ‘S/W’ buttons
respectively. The ‘Start/Stop’ and Hold/Reset’ buttons will control the stopwatch operation as per the
below table.
Fu SS
Stopwatch settings
Function
Display Type
Description
'Up' button
function
hh:mm
(4200)
Stopwatch
Mode
Std
Display can be freely switched between clock &
stopwatch mode using IR remote control.
Select count
direction
Off
Stopwatch mode is disabled.
Exit to Time
display
Only
Clock mode is disabled.
Select count
direction
Count
Direction
SA
01
Up from zero. Reset sets count to zero.
Select hold mode
SA
02
Down from pre-programmed start time & stop at zero. Select hold mode
SA
03
Down from pre-programmed start time & then up from
zero.
Select hold mode
SA
04
Down from pre-programmed start time & automatically
restart countdown.
Select hold mode
Hold Mode
SB
01
Single, start/stop, start/stop count action. No hold
function.
Select display
resolution
SB
02
Start/stop, start/stop count action. Hold action displays
accumulated split time.
Select display
resolution
SB
03
Start/stop, start/stop count action. Hold action displays
incremental split time.
Select display
resolution
SB
04
Start/stop, start/stop count action. First hold action
displays accumulated split time, second rejoins ongoing
count.
Select display
resolution
SB
05
Start/stop, start/stop count action. First hold action
displays incremental split time, second rejoins ongoing
count.
Select display
resolution
Display
resolution
SC
01
Minutes & seconds
Countdown
duration seconds.
SC
02
Hours & minutes
Countdown
duration seconds.
SC
03
Minutes & seconds up to 59 minutes, 59 seconds, then
Hours & minutes
Countdown
duration seconds.
16
Issue 2.1
