Wharfedale Pro R1604, Руководство по эксплуатации

Страница: 9 / 16

Rear Panel R1604/2004
39. Inserts Point (R2004 only) The Channel Inserts:
All mono input channels of R2004 are equipped with inserts. They are pre-fader, post-EQ and pre-aux
send. The Insert Points are used to send the channel signal to processors (compressors, gate, EQ unit
,,
etc.) and to bring the processed signal back into the channel. Insert Points use stereo 1/4 (TRS) jacks
with the Ring acting as a send to the processor, and the Tip acting as a return from the processor. They
can also be used to send to effect units, return the signal through the effect return points. Inserts can also
be used as post-EQ direct outputs, without interrupting the signal path. To this end, you will need a cable
fitted with mono phone plugs on the tape machine or effect device end, and a bridged stereo phone plug
on the console side (tip and ring shorted together).
40. Main XLR Outputs : Balanced XLR will be wired pin 1 ground/ pin 2 hot (positive), pin 3 cold (negative).
41. ALT 3-4 Outputs - Balanced TRS socket will be wired tip=signal, Ring=negative, sleeve =ground.
42. AC Power Cable Connector
43. Power Switch - On/Off
Rear Panel 1604
42
43
41 39
Rear Panel 2004
40 41
40 43 42
R Series Mixers
R1604 & R2004 .8.