Wharfedale Pro R1604 Скачать руководство пользователя страница 3

Getting Started

1. Power Supply

The R Series mixer is supplied with an external power supply unit. Only use the power supply provided 

with your mixer. Connect the R Series mixer to the power supply unit and THEN connect the power 

supply unit to the Mains. During long periods of operation the mixer may become warm. Therefore it is 

important that the unit is placed where the air is able to flow freely around it. The power supply is factory 

set to the correct voltage and this can be checked by referring to the label on the unit. If the mixer is used 

in a country having a different supply voltage then a new power supply will be required and you should 

consult your dealer.

2. Packing

Every care has been taken to ensure that your mixer reaches you in perfect condition and working order. 

The exterior and internal packaging has been designed to protect the unit in transit, but should you notice 

any damage to the unit, please notify the place of purchase immediately.

3. Safety

Avoid the excessive heat, humidity, dust and vibration: 

Keep the unit away from locations 

where it is likely to be exposed to high temperature or humidity, such as near radiators, stoves, etc. Also

avoid locations which are subjected to excessive dust accumulation, or to vibration that could cause 

mechanical damage.

Avoid physical shocks: 

Strong physical shocks to the unit may cause damage. Handle the unit 

with care.

Do not open the case to attempt to repairs or modifications yourself: 

This product 

contains no user-serviceable parts. Refer all maintenance to qualified service personnel.

Always power off before making connections: 

Always turn the AC mains OFF before

connecting cables. This is important to prevent damage to the unit itself as well as other connected

equipment.

4. Warranty

The R Series mixers warranty covers any defects in the manufacture of the product for a period of 12 

months from the date of purchase. The Warranty is non-transferable and applies to the original purchaser 

only. Should you have any Warranty issues, please contact your place of purchase who will advise on a 

returns procedure.

R Series Mixers

R1604 & R2004

.2.

Содержание R1604

















Отзывы: