43
A.B.S
Make the model car to generate intermittent braking action, namely point type brake.
Trigger point:
A.B.S trigger position action.
0
as long as the brake it will generate A.B.S action.
50 The brake reached 50% produce A.B.S action.
98 brake reached 100% produce A.B.S action.
Returns:
the return of the brake. When Removing the brake action,
the corresponding actuator position of the return ratio.
0
returns ratio is 0, which does not return, no A.B.S function,
become a common brake.
50
return 50%.
100
to return to the position of neutral point.
Delay:
delay start up A.B.S. When meet the A.B.S onset conditions,
delay in starting the function.
0
without delay.
50
delay of about 0.5s to start A.B.S.
100 delay of about 1s start A.B.S.
Circulation:
point velocity. Brake and release the brake will require for a time cycle.
The set value is small, put less time on it;
conversely, the set value is larger, spend more time on it
.
Duty:
point efficiency. Brake time accounted for the entire point time proportion.
Low, brake time accounted for the entire point time of 25% .
Mid, braking time to put 50% of the time.
High, brake time accounted for the entire point time 75%.
No configuration
A.B.S
A.B.S
is configured
trigger
operation direction
A Cycle
Brake returns
Trigger
point
X: Braking
Y: Brake Gap
X:Y
Duty Cycle
A
.
B
.
S Diagram
Set: Main Menu
→
ADVANCE
→
A.B.S
The application of
A.B.S
:
1,The
A.B.S. MODE
is set to
ON
, the function can take effect.
2,When this function is set to switch control, set the
A.B.S . MODE
to
ON
,
And then it is controlled by the switch whether the function will take effect or not.
The specific operation can be seen in the function selection.
Function Description
Содержание X4
