Wfly X4, Инструкция по эксплуатации

Страница: 42 / 56

42
Advanced Settings
Programming Of Mixed Control [PR MIX]
Move throttle, direction, channel 3, channel 4 can be arbitrarily mixing.
The main channel: select the input channel of the mixed control.
Auxiliary channel: select output channel of the mixed control. The main channel of the
action will be mixing to the auxiliary channel.
The ratio of the left:
the ratio of the negative end
. Mixing output range: -120% ~ +120%
The right ratio: the mixing ratio of the positive side .Mixing output range: -120% ~ +120%
Trimming: can choose the input channel of the fine tune whether mixed control to output
channel.
Mixing: can choose some sets of the input channel whether it is mixed control to the output
channel.
The following is the each channel as the main channel, selection of mixing, the main
channel will mix to some functional auxiliary channel:
Direction(STEER): EPA, SPEED , D/R, EXP, 4WSMIX;
Throttle(THR): EPA, SPEED, SXNT, IDLUP, NTBRK , TH ACC, A.B.S, EXP, ESCMIX,
ATL, THOFF;
Channel 3: EPA, 4WSMIX, BK MIX;
Channel 4
:
EPA, BK MIX, ESCMIX.
Set
:
Mixing application programming:
1,
PR MIX.MODE set to ON , the function can take effect.
2, PR MIX.MODE set to ON , Then controlled by a switch or the commencement of its
functions. The specific operation can be seen in the DIAL SW .
1, MAIN MANU
→
ADVANCE
→
PR MIX
2
,
MAIN MANU
→
ADVANCE
→
DIAL SW
or(MAIN MANU
→
DIAL SW)
Function Description