●
Function
Throttle curve can be adjusted according to the
throttle stick position to keep engine rpm
operates in its best state.This throttle curve can
set to normal and stunt curves and so on.The
operation of those curves can carried out by the
switch.The throttle curve of normal curve is basic
on hovering, the engine rpm with the pitch can
achieve the best effect. Stunt Curve is maintaining a
certain engine speed,make the throttle with the
pitch to complete the stunts in the flying .
1 9
5.Sub Trim
●
Function
●
Settings
When the electronic trim can not make the servo
to achieve a satisfactory angle, be corrected by
the function, can make the servo to reached a
ideal angle which user wanted. When set this
function , please place the trim in the central
location, then start setting
In the "Preferences" interface,use Up / Down keys
to select the "Sub trim", press the OK key to
confirm you access in this interface, as above.
The steps of settings is as follows:
1. First to use the arrow keys to select the edited
item.
2. Set the amount of the sub trim of movement with
the + / - keys or used the OK key to implement, long
press the OK kay can restore the default value.
3. Set successfully, press EXIT key to return.
6.Trim Settings
●
Function
●
Settings
Trim settings function is adjustment for each trim
to change the trim sensitivity, settings amount can
be 1-250.
In the "Preferences" interface, use Up / Down
keys to select the "Trim" and press OK key to
confirm accessing in this function interface, as
above
The steps of settings is as follows:
1. First to use the arrow keys to select the Edited
item.
2. Set the amount of Trim with the + / - key , use OK
key to implement. If you choose "reset", can set the
trim location value to zero.
3. Set successfully, press EXIT key to return.
7.Throttle Curve Settings
Curve picture
Flight Mode
Dual rate
Exponentia
Curve point
Helicopter Functions
INSTRUCTION MANUAL
WFT07 REMOTE CONTROL DEVICE
