B E L 1 5 0 - 1 5 1 / 1 5 0 X - 1 5 1 X S e m i - A u t o m a t i c U n i f o r m C a s e T a p e S e a l e r s
14
65-02-7
02/06/07
A
RCH
C
ROSS
M
EMBER
V
ERTICAL
S
LIDE
A
DJUSTMENT
The machine arch cross member supports the upper tape head holder on the BEL 150. It mounts to the
arch assembly with vertical slide bar bearings that ride inside the arch columns, allowing the cross
member to move smoothly up and down for case height adjustment.
The bearings are made of a special hardwearing plastic material but may need periodic adjustment to
compensate for wear or for loosening due to shipping or operating vibration. If worn or loose, the
bearings allow excessive movement of the upper tape head holder and may affect taping performance.
Fig. 2 Arch Cross Member Mounting
