B E L 1 5 0 - 1 5 1 / 1 5 0 X - 1 5 1 X S e m i - A u t o m a t i c U n i f o r m C a s e T a p e S e a l e r s
11
65-02-7
02/06/07
Preventative Maintenance Guide BEL 150-151 / 150X-151X
D
A
I
L
Y
8 Hrs
.
•
Keep framework and conveyor belts clean of dirt build-up, grease and oil residues.
•
Check drive belts for wear.
•
Check for worn or broken electrical connections.
•
If supplied, check that all casters are in the locked position.
3
W
E
E
K
S
120
Hrs.
•
Check drive belts for proper Belt Tension and Belt Tracking, refer to pages 6 & 7 of Operation
and Service manual.
Note:
Correct tension and tracking will prolong belt and drive bearing
life.
•
Lubricate
Uni-Drive
Side Belt drive chain and width adjustment roller chain with a Moly type
spray chain lube.
•
Cycle Height and Width adjustments and check for binding.
•
Inspect electric motor and gearbox for evidence of oil leakage, noise or vibration and keep unit
free of dirt, excess accumulation of dirt or grease will affect the proper cooing of the units.
3
M
O
N
T
H
L
Y
480
Hrs
•
Lubricate width and height adjustment lead screws with a Synthetic Teflon Grease (Loctite
–
Super Lube )
•
Remove drive belts, Drive and Idle Pulleys should be inspected for bearing wear and pulley
damage. Remove any dirt build-up before drive belts are re-installed. Refer to pages 6 & 7 of
Operation and Service manual.
•
Check Tension of the Uni-Drive Side Belt chain drive. Note: Proper Tension is achieved when
the horizontal sag in the chain measures between 1/8” and ¼” with drive belts in a fully opened
position. Refer to Operation and Service manual
•
Check Cross Member Vertical Slide Adjustment for wear. Excessive wear may affect taping
performance. Refer to Operation and Service manual
•
Check and lubricate Swivel Casters if equipped.
•
Check for any loose or missing fasteners.
For more detail, see BEL 150-151 / 150X-151X Technical Reference publication 66-02
