27
WWW.WETJETPOWER.COM
1. Ensure the motor switch is in the “OFF” position.
2.
Confirm that the electrical supply is identical to the specifications listed on the pressure
washer data plate.
3. GROUNDING INSTRUCTIONS:
This product must be grounded. If it should
malfunction or breakdown, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock. This product is equipped with a cord that
has an equipment-grounding conductor. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
4. DANGER:
Improper connection of the equipment-grounding conductor can result in a
risk of electrocution. Check with a qualified electrician or service personnel if you are
unsure if the outlet is properly grounded. Do not modify the plug - if it will not fit the
outlet, have a proper outlet installed by a qualified electrician. Do not use any type of
adaptor with this product.
5. GROUND FAULT CIRCUIT INTERRUPTER PROTECTION:
This pressure washer
may be provided with a Ground Fault Circuit Interrupter (GFCI) built into the plug or
the power supply cord. Test the GFCI each time it is plugged into an outlet according to
instructions on the GFCI. DO NOT use the pressure washer if the test fails. The GFCI
provides additional protection from the risk of electric shock. Should replacement of
the plug or cord become necessary, use only identical replacement parts that include
GFCI protection.
6. WE DO NOT RECOMMEND THE USE OF EXTENSION CORDS
. If use of an
extension cord is unavoidable, it must be plugged into a GFCI found in circuit boxes or
protected receptacles. Use only 3-wire extension cords that have 3-prong grounding-
type plugs and 3-pole cord connectors that accept the plug from the product. Use
only extension cords that are intended for outdoor use. These extension cords are
identified by a marking that states “Acceptable for use with outdoor appliances; store
indoors while not in use.” Only use extension cords that have an electrical rating
greater than the rating of the product. Do not use damaged extension cords. Examine
extension cords before use and replace if damaged. Do not abuse extension cord
and do not pull on any cord to disconnect. Keep cord away from heat and sharp
edges. Always connect or disconnect the extension cord from the receptacle before
connecting or disconnecting the product from the extension cord.
7. Ensure the area between the pressure washer cord and outlet is kept dry.
8. Insert the male plug into a grounded AC outlet. DO NOT use an adapter OR remove
the grounding plug.
POWER CORD CONNECTION
