9
Safety Notes
Do not continue to use the unit if the unit is damaged. Repair
work must be done by a qualified service technician.
Disconnect the unit from the power mains if you don't use it or
clean it (unplug, release fuse, etc.).
Close proximity to strong transmitters may cause malfunctions
of the motion detector. Strong transmitters can be e.g. amateur
radio operators in your neighbourhood or transmitting masts for
mobile telephone systems or broadcasting stations. In this case,
it may happen that the motion detector switches on casually,
without detecting an animal or a person near by the motion de-
tector.
Do not expose the LED floodlight to excessive temperatures,
strong magnetic fields or to strong vibrations.
Do not use the product in rooms or in poor ambient conditions
where flammable gases, vapours or explosive dust may be pre-
sent or are present! There is a risk of explosion!
Do not immerse any components of the LED floodlight in liquids
of any kind.
Position the power cord securely so it cannot become a tripping
hazard. Do not bend the power cord too much and do not jam
the cord or pull it around edges.
Immediately replace a broken glass of the floodlight.
Allow at least 1 m illuminating distance to other ob-
jects.
Never cover the product when it is in use.
The product is not intended for operation in altitudes of over
2000 meters.
Do not disassemble the unit or attempt to modify or repair it
yourself. It does not contain parts serviceable by you. In case of
questions or problems, turn to our customer service
.
