17
Operation
Hint: If the floodlight glows faintly
when OFF after connecting, switch
the cables in the terminals L and
N.
3.
Re-tighten the lock nut (7).
4.
Secure the power cable with the
waterproof grommet (8).
5.
Install the wall mount (3) with two
or three suitable screws securely
to an appropriate place. Make
sure the floodlight is securely
mounted.
6.
Tilt the floodlight to the desired
angle and tighten the hinge adjust-
ing screws (5) of the wall mount to
secure its position.
Note: Before installing the floodlight permanently to a
wall, check the proper functionality and the field of view
of the motion sensor (1). Select a suitable place of in-
stallation in order to have the floodlight activated in time
when passing the motion sensor.
Switching ON
The LED floodlight is switched on by plugging into mains
or by supplying power.
