Wetekom 80 21 67, Инструкция по эксплуатации

Страница: 23 / 31

18
Using
Additional Settings
1. In time display mode press and hold the mode key MODE (17) for 3 seconds.
The year digit blinks.
2. Press the mode key 3 more times. A 2-digit abbreviation icon that indicates
the language for displaying the weekday, blinks now.
3. Use the down key DOWN (18) and the up key UP (19) to setup the language.
7 languages are available:
GE
(German),
DA
(Danish),
ES
(Spanish),
NE
(Dutch),
FR
(French),
IT
(Italian) and
EN
(English)
4. Press the mode key to confirm the selected language. The 12/24 hour display
blinks now.
5. Use the down key DOWN (18) and the up key UP (19) to select either a 12-
hour display or a 24-hour display of the time.
6. Then press the mode key 3 times to return to the time display mode.
Synchronising Weather Station with Transmitter / Transmit Data
ƒ After inserting or replacing the batteries of the weather station the display is
initialised for 3 seconds. This is followed by a short beep sound. Then the
weather station synchronises with the transmitter (20) which is connected to
the PC.
ƒ The weather forecast data is transmitted from the PC to the weather station
and a small “ e ” icon blinks on the upper right corner of the display. This
process can take approx. 1-3 minutes. After reaching a successful connection,
the small “
e ” icon is shown permanently on the display.
ƒ The weather forecast data are refreshed in regular intervals and are
transmitted from the PC to the weather station accordingly.
ƒ Press and hold the connection key REGI. (15) for approx. 3 seconds to force
transmitting data and to refresh the weather forecast data of the weather
station. The forecast readings are cleared from the display and replaced by the
currently transmitted information.
ƒ If the forecast data is not available for a certain day (e.g. if there is no
connection between the transmitter and the weather station of if there is no
internet connection), a “-“ icon will appear on the display for the corresponding
day.