10
Operation
Using
Depending on the operation purpose screw the burner head
(1) or the solder head (8) plus the desired soldering tip (9) or
(10) on the connector (2).
Turn the gas controller to the right (in direction ON) until you
hear a low hissing sound (escaping gas).
Light up the gas with a lighter or a match by holding in front of
the burner head, (when the solder head is attached on the
device, light it up by holding the match sidewise).
Use the gas controller (3) to adjust the flame to a length of
approx. 10 – 25 mm. A big flame needlessly wastes gas and
creates an unstable flame.
To turn off the micro gas soldering iron, turn the gas controller
completely back to close it.
Put the micro gas soldering iron on the support (6) and let cool
down completely.
5
3
8
1
Nozzle
Soldering Tip
2
