G O -
4 E V O p e r a t o r ’ s M a n u a l
| 23
Contact Westward Industries for Manuals and Documentation. Do not copy.
3.4 Steering Column Controls
3.4.1 Left Multifunction Steering Column Stalk
The left steering column stalk is used to operate the turn signals and lights.
Turn Signals: Pull stalk down until it latches to signal a left turn and push it up for a right turn. The
indicator lights on the digital display will indicate which turn signal is active. When the turn is complete the
steering wheel will self-cancel the turning signal. If the turn signal continues to flash, push the stalk switch
back to the OFF position.
Dimmer Switch: To change the headlamps from the low to high beam setting, push the stalk away from
you until it latches, then release the stalk. The blue high beam indicator on the dash will illuminate when
the headlamps are on the high beam setting. To change your headlamps from high to low beam, pull the
lever toward you and release.
Flash to Pass:
Pull the stalk toward you and hold to momentarily turn on the high beam.
Lights: Rotate the knob on the end of stalk to the first position to activate the clearance, parking, license,
and taillights. Rotate the knob to second position to activate headlights, license, and taillights.
Daytime running lights: Once the vehicle is running the daytime running lights automatically come on.
WARNING:
The daytime running lights should not be relied upon for night driving, use the vehicle’s
headlights instead and use high beams as necessary
Figure 20: Steering Column Stalk and Hazard Flasher Button Locations
Steering Column Stalks
Hazard
Flasher
Button
