G O -
4 E V O p e r a t o r ’ s M a n u a l
| 27
Contact Westward Industries for Manuals and Documentation. Do not copy.
3.9 Seat
3.9.1 Adjustment
Regular Seat
The regular seat has 4 forms of adjustment. The seat can
be slid forwards and backwards by pulling up on the
lever under the front of the seat while sliding seat until it
is in the desired position and then releasing the lever.
The front or rear of the seat can also be tilted. This is
done by pulling one of two levers located on the left side
of the bottom cushion of the seat (as shown below),
while leaning in the appropriate direction. Do not put
pressure on the seat back while attempting to lift lever as
this could bind the system. Finally, the seat back angle
can be adjusted using the lever located on the left side of
the seat where the seat back meets the bottom cushion.
CAUTION:
Do not put pressure on the seat back while
attempting to lift lever as this could bind the system.
Premium Seat (Option)
Vehicles may be equipped with and air-ride, air-adjustable, premium seat with power controls as an
option. This seat has a wide range of adjustment to ensure the most comfortable seating position for
operators. This reduces greatly reduces operator fatigue and improves the driving experience.
The premium seat has six methods of adjustment.
Sliding Adjustment:
The seat can be slid backwards and forwards by pulling upwards on
the lever located under the front right corner side of the seat
cushion, then sliding the seat to the desired position and releasing
the lever.
Seat Back:
The seat back can be tilted backwards or forwards by pulling
upwards the lever located where the seat back meets the bottom
cushion on the left side of the seat, then tilting the seat back and
releasing the lever.
Figure 25: Regular Seat Adjustment Controls
Figure 26: Back Tilt Adjustment Lever
