Auto-Darkening welding helmets are designed to protect the eyes and face from sparks,
spatter and harmful radiation under normal welding conditions. Auto-Darkening filter
models automatically change from a light state to a dark state when an arc is struck, and it
returns to the light state when welding stops.
Auto-Darkening welding helmets come ready for use. Follow all “safety” warnings, make
all helmet fit adjustments and select the correct shade number for your welding application
prior to use.
• This Auto-Darkening welding helmet is not suitable for laser welding and
oxyacetylene welding / cutting processes.
• Never place this helmet and Auto-Darkening filter on a hot surface.
• Never open or tamper with the Auto-Darkening filter.
• This Auto-Darkening welding helmet will not protect against severe
impact hazards, including grinding discs.
• This helmet will not protect against explosive devices or corrosive
liquids.
• Don´t make any modifications to either the filter or
helmet, unless
specified in this manual. Do not use replacement parts other than those
specified in this manual.Unauthorized modifications and replacement
parts will void the warranty and expose the operator to the risk of
personal injury.
• Should this helmet not darken upon striking an arc, stop welding
immediately.
• Don´t immerse the filter in water.
• Don´t use any solvents on the filter screen or helmet components.
• Use only at temperatures: 14°F ~ 131°F (-10º C ~ +55º C)
• Storing temperature: - 4°F ~ 158°F (-20º C ~ +70º C)
• Protect filter from coming in contact with liquid and dirt.
• Clean the filter surface regularly; never don´t use strong cleaning solutions.
Always keep the sensors and solar cells clean using a clean lint-free
tissue.
• Regularly replace the cracked / scratched / pitted front cover lens.
• Never try to open the filter cartridge.
• The materials which may come into contact with the wearer’s skin, can
cause allergic reactions in some circumstances.
