4
49C154
Westward Operating Instructions and Parts Manual
Portable/wheel Pressure Washer,1500PSI
Recommend the operator wear ear
protectors.
WARNING!
Do not use the machine within range of
people unless they wear protective clothing.
Do not direct the jet against
yourself or others in order to clean clothes or foot-
wear.
Risk of explosion-Do not spray
flammable liquids.
High pressure cleaners shall not be
used by children or untrained personnel.
High pressure hoses, fittings and
couplings are important for the safety of the machine.
Use only hosed, fittings and couplings recommended
by the manufacturer.
To ensure machine safety, use
only original spare parts from the manufacturer or
approved by the manufacturer.
Water that has flown through
backflow preventers is considered to the non-potable.
The machine shall be disconnected
from its power source by removing the plug from the
socket-outlet during cleaning or maintenance and
when replacing the machine to another function.
Do not use the machine if a supply
cord or important parts of the machine are damaged,
e.g. safety devices, high pressure hoses, trigger gun.
If an extension cord is used, the
plug and socket must be of watertight construction.
Inadequate extension cords can be
dangerous.
Machine not suitable for connection
to the potable water mains.
The machine is intended to be
used at a temperature above o degree. (Only for
machine with power cord of H05VV-F).
To ensure the machine safety, only
use original spare parts (including nozzle) from the
manufacturer or approved by the manufacturer. Do
not use the machine before you changed them if they
are damaged.
Be care of the danger of the
kickback force on the spray assembly when opening
the trigger gun and grasp the gun with hands firmly.
When the machine is moving and
installing, the machine must be in flat.
Connect to the water supply.
The machines are not suitable for connection to
potable water mains.
Connect the machine to the water supply. (It can be a
water container).
Make sure the inlet water pressure keeps between
0.01MPa and 0.4MPa.
Do not use the pipe if the pipe is damaged.
If you want to connect this machine to portable water
mains, you must install a backflow preventer in the
water pipe to prevent dirty water flow back to the
drinking water system. The backflow preventer shall
comply with EN 60335-2-79 ANNEX AA.
Disconnect from the electrical
power supply before carrying out user maintenance.
If the mains cable is damaged it must be replaced by
the manufacturer, service agent, or a trained person
to avoid hazard.
Connection
1. Attach the high pressure hose to the pressure
water outlet of the machine.
2. Attach the spray handle to the high pressure hose.
Prior to operating the machine please ensure that the
high pressure hose has been completely uncoiled.
While the machine is in operation the hose must not
loop.
3. Assemble the nozzle or any other equipment you
want to use.
4. Connect the machine to the water and power
supplies.
Installation, electrical and water
connections
1. pressure cleaner 2. water supply hose
3. water connection 4. water inlet
5. high pressure tube 6. water outlet
7. spray gun 8. power supply
* No. 2, 3, 8 are not included.
