30
Portable System Overview
(con’t.)
Power/Ready
-
This dual LED indicator will alert the user when there is AC power
connected to the system (RED LED). This LED will also indicate when the nozzle safety
switch is released, allowing the cleaning cycle to be activated (GREEN LED). The RUN
button on the handset WILL NOT operate when this LED is RED. To disable the safety
switch, apply slight pressure against the bulkhead mating sleeve and gently slide the
handset forward. Notice the POWER/READY LED turn green. Press the RUN button on the
handset.
Low Solvent -
When lit, indicates the solvent level is too low to operate and the system is in standby
mode. The solvent resevoir must be refilled before operation can be continued. The
solvent resevoir contains 225 ml. of solvent.
Service -
When lit, indicates the system filters need to be replaced. The reset button is pushed to
reset the system cycle counter to zero. System will count 100,000 cleaning cycles before
filter change is necessary and indicated.
System Status Indicators
Inspection
Probe Input
System
Status LED’s
