32
Portable System Quick Start
Start-up Instructions
Step 1
Complete
the assembly instructions.
Step 2
Power
ON the unit.
Step 3
Prime
the nozzle. If you are using the system for
the first time, or it has been OFF for greater than 4
hrs, you may need to prime the handset.
WARNING:
Always point the handset away from you when operating.
PRACTICE
- Using a Universal 2.5mm Tip, hold the handset securely in one hand and
push the tip into the handset. Notice the POWER/READY LED turns green. Press the RUN
button on the handset 2-3 times. Note: If you are using a tip with a smaller diameter
nozzle, i.e. LC, it may be necessary to prime up to 5
times.
Step 4
For bulkhead applications:
Plug
the cleaning tip into the bulkhead mating
sleeve as you would an using a Westover Scientific
Video Inspection Probe. Apply slight pressure
against the mating sleeve and gently slide and hold
the handset forward. Notice the POWER/READY LED
turns green. Press the RUN button on the handset.
