21
Bench-Top System Quick Start
Step 1
Complete
the assembly
instructions.
Step 2
Turn
the power switch to the ON position.
Step 3
Prime
the system.
If you are using the system for the first time, or it
has been turned OFF for greater than 4 hrs., you may
need to prime the handset.
WARNING:
Always point the handset away from you when operating.
Using a Universal 2.5mm Tip, hold the handset securely in one hand and push the tip into
the handset. Notice the POWER/READY LED turns green. Press the RUN button on the
handset. Repeat 2-3 times. Note: If you are using a tip with a smaller diameter nozzle,
i.e. LC, it may be necessary to prime up to 5 times.
Step 4
For bulkhead applications:
Plug
the
cleaning tip into the bulkhead mating sleeve as if you
would, using a Westover Scientific Video Inspection
Probe. Apply slight pressure against the mating
sleeve and gently slide and hold the handset forward.
Notice the POWER/READY LED turns green. Press the
RUN button on the handset.
Start-up Instructions
