-10-
-11-
SHREDDER/SLICER ASSEMBLY
Not included with all grinders.
NOTE:
The Shredder/Slicer Attachment cannot be used with meat products.
1. Loosen the
Head Locking Knob
on the side of the
Motor Unit
.
2. Install the
Shredder/Slicer Head
onto the
Motor Unit
(figure 7).
3. Tighten the
Head Locking Knob
to secure the
Shredder/Slicer Head
in place.
4. Insert a
Blade
into the
Shredder/Slicer Head
until it is fully seated. The open end
of the
Blade
should face outward. Make sure the notches in the
Blade
mesh with the
splines on the drive shaft within the cavity of the
Head
.
5. Insert the
Blade Retaining Pin
into the hole in the front, upper-right corner of the
Shredder/Slicer Head
. The longer leg of the
Retaining Pin
goes on the inside of the
Blade
(figure 8).
6.
ALWAYS
us the
Stomper
to push food into
the
Head
,
NEVER
use hands.
Shredder/Slicer
Stomper
Blade
Blade
Retaining Pin
Head
Locking Knob
NOTE:
The Shredder/Slicer Attachment cannot
be used with meat products.
NOTE:
Follow the “Food Safety Guidelines” in this
manual and as outlined by the U.S. Food and Drug
Administration (FDA) whenever using this appliance.
Keep meat/food refrigerated and covered. Do not
let meat/food sit out any longer than is necessary for
processing.
1. Cut cheese, fruit or vegetables into pieces that
will easily fit into the
Shredder/Slicer’s
feed chute.
IMPORTANT:
Remove pits, stems, shells
and seeds before placing fruits or nuts into the
Shredder/Slicer
to avoid damaging the
Blade
.
2. Place a bowl or plate under the open end of the
Shredder/Slicer Head
to collect
food as it exits.
3. Make sure the
Motor Unit
is turned “off.” Connect the
Motor Unit
to an electrical outlet.
4. Turn the
Motor Unit
“on.”
5. Feed food into the
Shredder/Slicer Head
.
6. Use the
Stomper
to push food into the
Shredder/Slicer Head
.
NEVER use
your fingers! NEVER reach into the Blade opening!
HELPFUL HINT:
If the
Blade
fills with food, turn the
Motor Unit
“off” and disconnect
it from the electrical outlet. Use a rubber spatula or a wooden spoon to scoop food
out of the
Blade
into the bowl.
NEVER use your fingers! NEVER reach into the
Blade opening!
USING THE SHREDDER/SLICER
Not included with all grinders.
Follow all of the Safety Rules
and Warnings in this manual
whenever using this appliance.
Never leave this
appliance unattended.
Disconnect from power supply
when not in use.
WARNING!
Keep fingers, hands,
other body parts and
foreign objects away
from the inlet during
operation!
Only use the provided
stomper to push food into
the appliance.
Keep children away!
WARNING!
Before cleaning, assembling or disassembling the
Meat Grinder &
Shredder/Slicer
, make sure it is turned “off” and disconnected from the power source.
Test to make sure there is no power to the
Motor
by switching the
Motor Unit
“on” and “off.”
Figure 8
Figure 7
Motor
Unit
Head
Locking
Knob
Reverse Button
Power Switch
Power
Cord
Shredder/Slicer
Head
