7
ENGLISH INSTRUCTIONS
Hole 1
FIGURE 5
FIGURE 4
Hole 1
5. Slide the Chute up into the Apple
Crusher Body.
FIGURES 4 & 5
6. Line up Hole 1 of the Chute to Hole 1
of the Apple Crusher. Secure the Chute
to the Apple Crusher Main Body using a
Machine Screw and Wing Nut. Repeat
on the other side of the Chute. Tighten
both Wing Nuts by hand.
FIGURE 6
7. When table-mounting the Crusher,
make sure the Handle can freely rotate.
A table corner is an ideal location.
8. Secure the Crusher to the table with
the two C-Clamps.
FIGURE 7
FIGURE 6
FIGURE 7
