manualshive.com logo in svg

Westomatic ELEVATE QUARTZ, Руководство по эксплуатации, Страница: 33 / 77

Поделиться
Скачать
Westomatic ELEVATE QUARTZ Скачать руководство пользователя страница 33

32

Cleaning and maintenance

704 67 020 00 _ 111

GF Robimat XL / XM

OPERATING INSTRUCTIONS

max. 10°

5.3  Product basket

Basket removed

5.3.1  Removing the product basket

5.3.2  Installing the basket

Release button

Hooks

Alignment guidance!

2

1

3

The product basket can be removed for cleaning. It can be cleaned in the dishwasher at max. 65°C. 

Release the two unlocking hooks and pull the basket slightly 

towards the right. Then unhook the basket and take it out.

• 

Unfold the bearing for toothed wheel pendulum by hand.

• 

Insert the basket into the holder in a slightly slanted position (approx. 10°).

• 

Push the basket to the left so that the hooks snap into the notch correctly.

• 

Finally, swing the basket back in and push it upwards so that the unlocking buttons can be heard clicking into 

place ("click").

• 

Malfunctions will occur if the product basket has not clipped in correctly.

Gear wheel assembly

Содержание ELEVATE QUARTZ














































































Отзывы:

Нет отзывов