- 6 -
12
–Secure work
-
Where possible use clamps or a vice to hold the work. It is safer than using your hand.
13
–Do not overreach
-
Keep proper footing and balance at all times.
14
–Maintain tools with care
-
Keep cutting tools sharp and clean for better and safer performance.
-
Follow instruction for lubricating and changing accessories.
-
Inspect tool cords periodically and if damaged have them repaired by an authorized service
facility.
-
Inspect extension cords periodically and replace if damaged.
-
Keep handles dry, clean and free from oil and grease.
15
–Disconnect tools
-
When not in use, before serving and when changing accessories such as blades, bits and cutters,
disconnect tools from the power supply.
16
–Remove adjusting keys and wrenches
-
Form the habit of checking to see that keys and adjusting wrenches are removed from tool before
turning it on.
17
–Avoid unintentional starting
-
Ensure switch is in “off” position when plugging in.
18
–Use outdoor extension leads
-
When the tool is used outdoors, use only extension cords intended for outdoor use and so
marked.
19
–Stay alert
-
Watch what you are doing, use common sense and do not operate the tool when you are tired.
20
–Check damaged parts
-
Before further use of tool, it should be carefully checked to determine that it will operate properly
and perform its intended function.
-
Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and
any other conditions that may affect its operation.
-
A guard or other part that is damaged should be properly repaired or replaced by an authorized
service center unless otherwise indicated in this instruction manual.
-
Have defective switches replaced by an authorized service center.
-
Do not use the tool if the switch does not turn it on and off.
21
–Warning
-
The use of any accessory or attachment other than one recommended in this instruction manual
may present a risk of personal injury.
22
–Have your tool repaired by a qualified person
-
This electric tool complies with the relevant safety rules. Repairs should only be carried out by
qualified persons using original spare parts, otherwise this may result in considerable danger to
the user.
23
-
Caution!
- Please follow the instruction of PRCD to avoid affection of the tool by water.
- The inspection of hoses and other critical parts which could deteriorate and the maximum
permitted pressure of the water supply.
