7
Preparation
INSTALLATION
Figure 2
Rear rollers
Plastic roller nut
INSTALLATION OF 120˚ HINGE
Please follow the instructions below to install the
120º hinge.
1. Unpack refrigerator, and remove all packaging.
2. Lay the refrigerator down on its back on a
piece of soft packing material. Use caution
and two people while laying the appliance
down.
3. Place adjustable rollers in the fully retracted
position by screwing height adjusting screw
fully anti-clockwise (Figure 2). Do not remove
the adjusting nut completely.
4. Attach rear rollers.
120º hinge
mounting plate
Attach mounting plate with 120º hinge and tighten
the screw.
120º hinge
screw
mounting plate
Use self tapping wood screws P No. A04121101
provided to attach the hinge to the cupboard door.
screws
Use
hinge to the cabinet.
screws attached to mounting plate to attach the
cabinet
37mm
cupboard door
Plastic roller nut
This dimension is typically 37mm
(from centre line of mounting plate
to the cupboard cabinet edge)