13
SECURING THE REFRIGERATOR IN
THE CUPBOARD
NOTE: When attaching
all screws
to cupboard, first drill
a 2mm pilot hole in the correct position. This will allow
easy hand insertion of self tapping screw.
Now that the refrigerator is correctly positioned:
Figure 12
Fridge
Figure 13
Screw in top hinge bracket to the cupboard
wall using 4 cupboard screws provided. This
will secure the top of the refrigerator (Figure 12).
.
1
Screw down both foot brackets to cupboard
floor with 2 cupboard screws. This will secure
the bottom of the refrigerator (Figure 13.)
.
2
ATTACHING SLIDE-BAR TO THE
CUPBOARD DOOR
Figure 14
120º
door
cupboard door
125mm
slide bar
refrigerator
Whilst slide-bar is still in housing:
Rotate slide-bar to uppermost alignment, mark
a line on cupboard door (Figure 15).
.
4
Figure 15
1.
Fully open cupboard door (120°).
Open refrigerator door until it rests against the
cupboard door.
.
2
Position slide-bar in slide-housing so that all three
holes are visible when both doors are fully open
(120°). This position is typically 230mm from the
edge of the slide housing (Figure 14).
.
3
