9
ATTACHING THE TOP HINGE
BRACKET
IMPORTANT!
You must ensure that the refrigerator door is:
•
Parallel with sides and top of cabinet.
The gap between the door and cabinet is
typically 10mm allowing the door gasket to
act correctly (Figure 4).
•
Remove top hinge cover (Figure 3), cover
clips off.
.
1
2.
Remove the three (3) top hinge screws.
3.
Elevate hinge.
Slide the top hinge bracket into position
below the hinge.
.
4
Re-attach hinge and screws ensuring that
refrigerator door is still correctly positioned.
.
5
NOTE: Ensure the gasket acts correctly, i.e. doesn’t
make a noise or leave gaps when the door is closed.
6. Recap hinge cover into position.
Figure 3
Top hinge
Top hinge cover
bracket
1
2
3
4
5
5
6
Top hinge bracket fitted.
Figure 4
10mm
ATTACHING SLIDE-HOUSING TO
REFRIGERATOR DOORS
Ensure slide-housing is positioned squarely
as shown.
.
1
Ensure that the slide-housing is positioned
on the door as shown in the diagrams.
.
2
NOTE: The slide-housing ‘wider edge’ side must always
be closest to the door handle side.
100mm
slide housing (flat)
door
handle
100mm
slide housing (curve)
door handle
wider edge
Slide housing (Flat Door version)
Slide housing (Curve Door version)
