2
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-0026-RevF
ECO #: W17-0060
DATE: 6/21/17
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
2. Starting at the driver side front, remove the rubber plug or sticker covering the oval hole in the bottom of the rocker panel,
see
Figures 1A & 1B. Note:
The rubber plug or sticker that is being removed is second from the front.
Insert (1) M12 Bolt
Plate into the hole and rotate 90-degrees to the slot, see
Figures 2A & 2B
.
Note:
Repeat step for all Bolt Plate installations.
Select (1) Driver Side Outer Support Bracket and secure to the Bolt Plate with (1) M12 lock washer, (1) M12 small flat
washer and (1) M12 hex nut, see
Figure 3.
Do not tighten hardware at this time.
3. Next, select the Driver Side Front Mounting Bracket. Bolt the Mounting Bracket to the back of the pinch weld with (2) M6
hex bolts, (4) M6 flat washers and (2) M6 nylock nuts, see
Figure 4.
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
Passenger Rear Inner
Support Bracket
Driver Rear Inner
Support Bracket
(4) M12 Bolt Plates
(2) M10 Long Bolt Plates
(2) M10 Short Bolt Plates
Driver Rear
Mounting Bracket
Driver Outer Support
Bracket
Driver Front
Mounting Bracket
(With Skid Plate) Driver
Front Inner Support Bracket
(No Skid Plate) Driver Front
Inner Support Bracket
Driver Outer Support Bracket
Passenger Front Inner
Support Bracket
Passenger Front
Mounting Bracket
Passenger Outer Support
Bracket
Passenger
Rear Mounting
Bracket
Passenger Outer Support
Bracket
Passenger Sidebar
Driver Sidebar
Remove rubber plugs
Figure 1A
Figure 2B
Figure 2A
Front
Figure 1B
Remove stickers
