Westfalia OSD 6-91-067, Инструкция по эксплуатации

Страница: 57 / 206

Westfalia Separator
Mineraloil Systems GmbH
57
2058-9001-101 / 0506
3.3 Starting the separator
•
See section 3.2.2.
•
Open the shut-off valve in the product feed line.
•
Switch on the motor.
Compare the current and starting time with the diagram (section 4.1.3) until
the bowl reaches the speed specified on the separator nameplate.
•
Start the preheater (if installed) after switching on the motor!
•
Open the stop valve in the product discharge.
•
Switch on the control unit.
•
Check that the operating mode selected on the control unit corresponds to the
valve positioning in the system.
•
Start the program.
•
After the feed valves have automatically opened
– set the backpressure in the product discharge to approx. 1.5 bar;
– adjust the desired throughput;
– when necessary, correct the backpressure in the product discharge.
•
Check the discharges for solids and dirty water; there must be no oil flow!
3.4 Monitoring of operation
The machine is monitored largely by the separator control.
Operations to be carried out regularly:
•
On your daily round, especially during the first 1500 operating hours, pay at-
tention to the following:
– Oil level
– Temperatures
– Pressures
– Leakage
– Vibrations
– Current consumption
– Starting time
– Hoses and hose pipes
•
Keep to the maintenance schedule (see 4.2.1)!
•
Inspection
We recommend having the separator checked regularly by our specialists.
These checks help to
– maintain the operating safety of the machine and
– avoid unplanned downtime.