Westfalia OSD 6-91-067, Инструкция по эксплуатации

Страница: 102 / 206

Westfalia Separator
102
Mineraloil Systems GmbH
2058-9001-101 / 0506
4.3.2 Cleaning the bowl
It is generally not necessary to dismantle self-cleaning bowls for cleaning after
separation unless
– the nature of the product makes it necessary,
– the separator is to be shut down for a lengthy period (see section 4.9).
•
Dismantle and clean the bowl for checking from time to time. See section
4.2.1 - Maintenance schedule.
•
Use only a cleaning agent that is approved for the field of application!
•
Do not use acid or chloric cleaning agents.
Chlorine attacks stainless steel parts.
•
Dissolve dried scale with citric acid.
•
For cleaning the individual disks and bowl parts
Do not use metal scrapers and metal brushes!
Fig. 120
•
Take the gaskets out of the bowl
parts.
•
Clean the grooves and gaskets to
avoid corrosion in the grooves.
•
Replace damaged, very swollen,
hardened or brittle gaskets
immedi-
ately .
•
Clean the small holes for the feed and discharge of the operating liquid with
particular care to ensure trouble-free bowl ejections.
Fig. 121
•
Clean the distributor between the
ribs with the brush on the inside and
outside.
When the distributor neck is very
dirty, the feed clogs which can cau-
se overflow.
•
Apply a thin coat of grease to the guide surfaces and threads of the bowl
parts after drying (see 4.2.4 Lubrication schedule).
•
Reassemble the bowl immediately after cleaning.