Westfalia 42 93 24, Инструкция по эксплуатации

Страница: 17 / 23

12
Operation
Article No. 42 93 24
Middle Line
Marking Rib
Locking Pin
Gear Wheel
Gear Wheel
Locking Pin
Middle Line
Marking Rib
Please observe the following hints when changing the blades.
2. After taking off the blade you will see the gear wheels. Make sure that no
dirt, grass leaves get in the gears. Important! Remove any dirt around the
gears.
3.
Turn the gear wheel so that the middle line of the marking rib on the gear
wheel is exactly positioned downwards or upwards, as shown in the upper
figure.
Installing the hedge/shrub blade
Move the upper blade of the hedge/shrub blade so that the middle line of
the plastic ring is positioned exactly in the centre of the hole.
4. Place the four locking holes of the hedge/shrub blade onto the four locking
pins on the gear carriage. Make sure the cam of the gear wheel com-
pletely snaps into the plastic ring.
Bottom Blade
Middle Line
Upper Blade
Hole
Locking Hole
Plastic Ring