Mounting
14
1.
Mark the drilling holes through the
bracket assy and drill holes with 10 mm
diameter into the gate post.
2.
Mark the drilling holes through the gate
bracket and drill holes with 10 mm
diameter into the gate.
3.
Tighten all screws and nuts. Protruding
bolt ends (10) should be cut with the
hacksaw.
Cover the gate opener while drilling. Please note that dust and swarf might
damage the gate opener.
Use the included screws or other suitable screws and dowels for the resp.
surface.
Drill Holes
Bracket Assy
Gate is in OPEN Position
10 mm Holes
Содержание 18 39 13
Страница 1: ...Swing Gate Opener Artikel Nr 18 39 13 Instruction Manual...
Страница 14: ...Reference Table 10...
Страница 36: ...Connection Diagram for Accessory 32 reserved...