Westfalia Automotive 1 093 491.9, Руководство пользователя

Страница: 32 / 69

3 2
6. Position reinforcement plate (1) in bumper
trim (2) and clip it is place using expansion
rivets (3). Refit the assembled bumper carrier
(see fig. 5) into the bumper trim (2). Refit the
entire rear bumper to the vehicle, align it and
tighten the nuts and bolts.
Tighten the nuts and bolts in the following
order:
1. Hexagon nuts with washers, towing
attachment/rear panel;
tightening torque: 55 Nm
2. M10 hexagon bolts, longitudinal struts/
luggage compartment;
tightening torque: 55 Nm
Hexagon bolts of strength class 10.9 and
hexagon nuts of strength class 10 are used.
7. Attach trailer nose-weight plate max. 75 kg
(1) to the cover plate of the luggage
compartment sill (2).
8. Attach sticker (1) with the operating
instructions in the spare-wheel well as
illustrated.
9. Saloon and Coupé
Insert foam support (1) for ball head (2) in
spare wheel and secure with washer and wing
nut.
Insert removed ball head (2) into foam
support (1) and tie down with Velcro-type
fastener.
Convertible
Insert ball head (2) in bag. Close bag. (The
bag is not shown). Insert bag with ball
head (2) in spare wheel and secure with
washer and wing nut.
Note: If bag is not provided, please order -
part no. 903 140 650 003.
Clean luggage compartment and reinstall
all removed parts in reverse sequence.
Subject to modification.
G B