Westerstrand Sportsystem
Dokument: 4320en01.docx
Förf.: CF
BASIC LED190/150
Datum: 2019-10-24
Sida: 6 av 14
Common for All Sports
Set Team Names
If the scoreboard can show team names, these can be entered in the remote control when a sport has been
selected. To set the names, first stop the match clock and then press [Change] followed by [Team Names]. If
any team names have already been entered, they will be shown on the screen. Select the team name to change by
pressing [Home] or [Guest]. The team name can now be entered with the alphanumeric keyboard. For example,
“HOME” is entered by pressing [4] twice, [6] three times, [6] one time and [3] twice. To erase letters, press
[Erase]. Save by pressing [Ok] or abort with [Cancel].
Note that the team names shown in the remote control display will still be ”Home” and ”Guest”. The entered
team names will only be shown on the scoreboard.
When a new match is started, the names will remain on the scoreboard. When the sport is ended with [Quit
Game], the team names will disappear.
Sport Settings
When a sport has been selected, temporary settings such as period time, timeout length and shot clock times can
temporarily be changed. This is done by selecting [New Period/Exit] and then [Sport Settings]. When a setting
has been changed, the game must be restarted. The changes will remain until the sport is exited with [Quit
Game].
Other Settings
Some settings that can be changed from the main menu can also be changed when a sport is started. These
settings include the display brightness, scoreboard brightness, real-time and button sound. To change these
settings, stop the match, select [New Period/Exit] and then [Settings]. The settings can then be changed in the
same way as described in the “Main Settings” chapter.
Manual Signal
To manually sound the match signal, press the button with the siren symbol.
What Happens at Power Down
The remote control is continuously saving all information in an internal memory. When it is turned off or
unplugged, the data is saved and can be restored when the remote is restarted. If a match was running when the
remote was turned off, the question “Restore Data?” will be shown at startup. Press [Yes] to restore the match or
[No] to go to the start menu.