Westerstrand Sportsystem
Dokument: 4320en01.docx
Förf.: CF
BASIC LED190/150
Datum: 2019-10-24
Sida: 5 av 14
Real-Time
Press the [Real-Time] button to change the settings for real-time. The following choices are shown:
Set Real-Time: Press to set the real-time.
Show: Show the real-time on the scoreboard.
Hide: Remove the real-time from the scoreboard.
Automatic display on: The real-time will automatically be shown on the scoreboard 8 seconds after the
remote control has been turned off or unplugged.
Automatic display off: Inactivates the automatic display of real-time.
Change the Light Intensity of the Scoreboard
Change the light intensity of the scoreboard by selecting [Board Brightness]. The value “50%” is always shown,
as the remote control does not know the current intensity of the scoreboard. The intensity can be set from 1 to
100%. Enter the value with the numeric buttons and press [Ok] to accept.
Version
To see the software version in the remote control, select [Version] This information is important when
contacting Westerstrands regarding any questions or problems.
Radio Address (Only Radio Versions)
When more than one radio remote control is used, they must be set to different ID:s. Press [Radio Address] to
change the ID:s. The digits shown on the screen are the scoreboard ID:s that the remote control will send data
to. Five different ID:s can be selected. Activate or deactivate an ID by pressing the corresponding numeric
button.
Example:
The radio remote control should send data to scoreboards with ID1 and ID2, but shows ”12345”. Deactivate ID
3, 4 and 5 by pressing the [3], [4] and [5] buttons. Now only “12” will be shown on the display.
How to set the ID:s in the scoreboards is described in the scoreboard manual.
Battery Information (Only Radio Versions)
Detailed information about the battery status can be shown by selecting [Battery Information].
Advanced Settings
The advanced settings are password protected changes that can’t be changed by the user.