Western WRM60 X, Руководство пользователя

Страница: 46 / 78

WRM60 X
User manual
EN
10
2.2.1.1 LG Chem batteries
Connect the battery cable eyelets: positive (+, red), negative (-, black) of the battery and the CAN communication
cable (included), as in
Pic.6 . It is also necessary to set the switches on the panel shown in Pic.7 :
SW Select (1): Value: 0 0 1 1 (OFF OFF ON ON) ( LGC Smart - Smart communication protocol ).
Pic.6 - Power cable Pic.7 - SWITCH settings Pic.8 - CAN LG Chem communication cable
2.2.1.2 Pylontech Batteries
Connect the quick clamps of the power cables supplied: positive (+, orange), negative (-, black) to the battery and
the CAN communication cable (included), as in
Pic.9 . Make sure that the quick clamps are correctly inserted into
the battery (you should hear a "click" once they are in the correct position).
Pic.9 - Cable installation on Pylontech battery
Internal connection to the Pylontech accumulator bank:
1. Connect the parallel cables (ORANGE and BLACK) between the MASTER battery and SLAVE battery;
2. connect the battery communication LINK cable : MASTER battery on Port 1, SLAVE battery on Port 0;
3. set all ADDRESS configuration switches to the OFF position , as they are not used.
4. Connect the CAN-BUS cable for communication with WRM60 X.
4 - INVERTER CAN
CABLE
2 - LINK SLAVE
CABLE on Port 1
6 - BUTTON
BATTERY START
2 - LINK SLAVE
CABLE on Port 0
5 - POWER
SWITCH 1
5 - POWER
SWITCH 2
1 - POSITIVE
1 - NEGATIVE
3 - SW ADDRESS
ALL OFF