Western UltreMount 2 Скачать руководство пользователя страница 100

Страница: 100 / 110

Lit. No. 79551, Rev. 07

101

June 15, 2022

Hose or Fitting Replacement

DO NOT

use thread sealant/tape on hoses or

fittings. This could damage the product. Follow the

recommended replacement procedures for fittings

and hoses.

WIDE‑OUT™ and WIDE‑OUT™ XL Blades:

Fully retract both wings (vee position).

PRODIGY™ Blades:

Move the blade to scoop

position so both wings are forward.

MAINTENANCE

2. Lower the snowplow completely and turn the

control OFF.

NOTE: Loosen the fill plug slowly to relieve

any pressure in the reservoir.

3. Carefully note the hose routing and position

of any protective hose wraps for proper

reassembly.

Loosen hoses or fittings slowly to relieve any

residual pressure.

4. To remove a hose, loosen and unscrew the

hose flare nut from the fitting.

To remove a fitting, loosen the jam nut and

unscrew the fitting from the port.

WARNING

Lower the blade when the vehicle is

parked. Keep 8' (2.4 m) clear of the blade.

Temperature changes could change

hydraulic pressure, causing the blade to

drop unexpectedly or damaging hydraulic

components. Failure to do this could

result in serious personal injury.

Содержание UltreMount 2















































































































Результаты поиска

Содержание UltreMount 2

Отзывы:

Похожие инструкции для UltreMount 2

Бренды по названию

Популярные бренды

Western UltreMount 2, Руководство пользователя

Результаты поиска

Содержание UltreMount 2

Отзывы:

Похожие инструкции для UltreMount 2

Бренды по названию

Популярные бренды