Water leaks from
the pipes.
1.seal ring is broken
2.screws doesn't lock tightly
3.pipes doesn't seal properly.
4.water pipe is broken
1.chang seal ring
2. lock the screws tightly
3. re-seal the silicone.
4. change water pipe
Control panel
doesn't work
1.Electricity line didn't connect to power source,
electricity leaking protection device cut off power.
2.power button is not working.
1.Re-connect the power source and
check the electricity leaking switch
button.
2.change a new control panel Lighting
is off
No lighting
1.The bulb is broken
2. power line is disconnected.
3.control panel is broken
1.change a new bulb.
2.re-connect the circuit.
3 .maintain or change control panel
Radio is off
1.speaker is broken
2. power line is disconnected.
3.control panel is broken
1.change a new speaker
2.reconnect the circuit.
3. maintain or change control panel
Problems
Reasons
Maintenances
1. turn on the system
2. check through and remove the
garbage which is inside the pump.
Switch pipe can be removed.
3. install a new water pump
Water Jets are
not working.
1.check the system whether is on.
2.the impeller of water pump doesn't rotate
3.water pump is broken which caused by
working without water coming in.
The intensity of
hydro-massage
cannot be a
djusted
1.water pump's suction has not enough power.
2.air adjustment valve is abnormal
3.jets or nozzles are blocked
1. check the water pump whether is
working normally.
2.change the air adjustment valve
3. remove things which are blocking
the jets.
No power or
electricity leaking
protection device
is activated
1.Electricity leaking protection device cut off
power source when electricity line is not well
connected.
2.Power or electricity circuit have phenomenon
of electricity leaking.
1.check and reconnect the wiring 3
system.
2.check the power source, electricity
circuit and ground line.
Troubleshooting
1.please use it at the normal situation
of voltage
2. check and change the switch
3.maintain and change the control
panel
4.get rid of mess of the jets.
Jets shower can
not be work
1. voltage is abnormal
2 .Switch cannot be work
3.control panel cannot be work
4. water in electromagnetism valve is be blocked
10
