RT-310 / RT-320 User Guide
Page 10 (30)
2.5 Installation Countries
Installation country regulatory limits and operating parameters are controlled by Software Country Code
parameter. This product supports:
Country Code
Operating Frequency Ranges Notes
Europe (EU)
2412 … 2472 MHz and
5180 … 5320 MHz,
5500 … 5700 MHz
Operation according to ETSI limitations
For detailed specification, refer to document [1]
United States
(USA)
2412 … 2472 MHz and
5180 … 5320 MHz,
5500 … 5700 MHz
5725 … 5850 MHz
Operation according to FCC limitations
For detailed specification, refer document [1]
Canada (CANADA) 2412 … 2472 MHz and
5180 … 5320 MHz,
5500 … 5700 MHz
5725 … 5850 MHz
Operation according to IC limitations
For detailed specification, refer to document [1]
Table 6 Installation countries
Note
: Further Software
releases might support additional country codes, for up-to-date country code specification
refer to document [1]
2.6 Regulatory Notices
Caution!
Any changes or modifications shall be approved by the party responsible for compliance. If not, users could void
the user's authority to operate the equipment.
Country code and antenna gain needs to be set properly for correct functionality in the installed country.
2.6.1 United States (FCC)
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(i.) this device may not cause harmful interference and (ii.) this device must accept any interference received,
including interference that may cause undesired operation.
Contains FCC ID:
2AEJD-103902-DT50RF
RF Exposure requirements:
To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more
should be maintained between the antenna of this device and persons during operation. To ensure compliance,
operations at closer distances than this are not recommended.
Antennas:
The device can operate with the antennas listed in 2.6.3.
