RT-220-HV / RT-220-LV User Guide
Page 31 (31)
5.2 Troubleshooting Based on Functional Behavior
Please read the troubleshooting instructions in reference document Software 6 Management Guide [1].
5.3 Repair Work
This product is exchanged as a whole unit. On product level no repair work is done in the field. Broken units need
to be returned to the supplier for repair.
5.3.1 Exchange of the Product
Order of Installation Step
Description
1. Remove Cables
Remove cables in the following order:
1. Power cable (or PoE cable)
2. Antenna cables
3. Ethernet cables
4. Protective earth cable
2. Open Screw
The four M6 screws in each corner of the RT-220 must be opened
and removed completely
3. Exchange
Lift the product out of its position. Place a replacement unit to its
position
4. Fix Screws
The four M6 screws in each corner must be fixed again.
5. Connect Cables
Connect cables in the following order:
1. Protective earth cable
2. Antenna cables
3. Ethernet cables
4. Power cable
6. Configure
Download configuration to the product
Table 21 Exchange flow
