RT-220-HV / RT-220-LV User Guide
Page 23 (31)
3.5.2 RF Antenna Connectors
The antenna connectors are identified with the text markings A1 (Antenna 1) and A2 (Antenna 2) in the
mechanics.
The antennas might be fixed in antenna connectors directly or using antenna cables fixed to the antenna
connectors.
Figure 12 Antenna interfaces
NOTICE
: If one of the antennas is NOT used, the unused antenna connectors MUST be terminated with 50 ohm
termination.
Pin
Signal Name, Function
Notes
1
Center pin: RF signal
Connector Type: QMA
– Female
2
Connector body: RF ground
Table 13 Pinning: RF antenna connector